Leica Geosystems’ 3D-Technology Enables Iowa-Based Contractor to Earn Smoothness Bonuses
31 January 2013
(Norcross, Ga., 1 February 2013) – Manatts Inc., an Iowa-based contractor, earns 70 to 95 percent of the available smoothness incentives on concrete paving projects, thanks in large part to the company’s new PaveSmart 3D machine control system from Leica Geosystems.
Late last year, Manatts worked on a $9 million project repaving a nine-mile stretch of U.S. Highway 71 in northwest Iowa. The family-owned business placed a six-inch concrete overlay atop the milled-asphalt pavement while their new GOMACO GHP-2800 slipform paver, fitted with 3D control from Leica, widened the four-lane, divided roadway from 24 feet to 34 feet. They earned the maximum smoothness incentive on about 95 percent of the pavement placed.
“In the old days, when we were paving on string line, if you got 50 percent of the available smoothness incentive payments on a project, that was good,” says Mike Viehdorfer, the project manager for the contractor. “Now that we are running stringless, we expect more and we are getting more.”
Manatts is running the Profile Index (PI) system for measuring smoothness, which is comparable to, but different from, the International Roughness Index (IRI). The Iowa Department of Transportation says it takes a PI of less than 22 inches of deviation per mile from a zero-blanking band to earn the maximum smoothness incentive. On Highway 71, Manatts has been consistently running between 13 and 19 inches of deviation.
Viehdorfer likes Leica PaveSmart 3D for several reasons:
- Leica Geosystems 3D machine control saves Manatts considerable time and money on labor and transportation costs associated with the staking of hubs, setting of blue tops and the setting up, maintaining and tearing down of string lines.
- Leica PaveSmart 3D also eliminates the potential for human error with string line, and eliminates logistical restrictions around the paver.
- Leica PaveSmart 3D is more accurate than a string line and integrates seamlessly with any GOMACO paver or trimmer.
- Leica PaveSmart 3D regulates the steering, grade, draft and cross fall of the paver with no need to retrofit complex hydraulics.
- Leica PaveSmart 3D guides the paver in relation to a digitized 3D model of the highway, running on the paver’s Leica Geosystems onboard machine computer.
Tim Tometich, machine-control manager for Manatts, says his company benefits from the GOMACO–Leica Geosystems combination, which is based on a 13-year collaboration. “The value that we have is that GOMACO has built their computer to talk to the Leica PaveSmart 3D computer. The GOMACO computer was built with Leica Geosystems stringless technology in mind, and the two computers talk really well to each other.”
Visit us at the 2013 World of Concrete at Booth C-5748
For additional product information, visit www.leica-geosystems.us/.
Leica Geosystems – when it has to be right
With close to 200 years of pioneering solutions to measure the world, Leica Geosystems products and services are trusted by professionals worldwide to help them capture, analyze, and present spatial information. Leica Geosystems is best known for its broad array of products that capture accurately, model quickly, analyze easily, and visualize and present spatial information.
Those who use Leica Geosystems products every day trust them for their dependability, the value they deliver, and the superior customer support. Based in Heerbrugg, Switzerland, Leica Geosystems is a global company with tens of thousands of customers supported by more than 3500 employees in 28 countries and hundreds of partners located in more than 120 countries around the world. Leica Geosystems is part of the Hexagon Group, Sweden.
For further information please contact:
Leica Geosystems Inc.
Andre Ribeiro, MBA
Director of Marketing Planning and Communications
Atlanta, GA 30092
Phone: +1 (770) 326-9557
Fax: +1 (770) 447-0710